The Workshop

Here are some of the projects I’ve worked on.

"Factory Fresh" Squire Jazzmaster

"Factory Fresh" Squire Jazzmaster

Not the most exciting transformation ever; here we have a brand new Squire Jazzmaster.
1978 Gibson "The Paul"

1978 Gibson "The Paul"

Here we have a 1978 "The Paul" owned by Tom from Wild Beasts who I work for form time to time.
Sunburst Fender Telecaster

Sunburst Fender Telecaster

Just needed a general setup and a bloody good clean!
Ash Fender Telecaster

Ash Fender Telecaster

Not much needed on this one, just a general setup!
Sunburst Fender Stratocaster

Sunburst Fender Stratocaster

Not much to do on this Fender Strat other than the usual fret work and setup jobs.
Gibson Lucille

Gibson Lucille

Had a real classic in today; ladies and gentlemen the Gibson B.B. King Lucille.
Sunburst Les Paul Studio

Sunburst Les Paul Studio

Another Gibson today; this time a 2013 Les Paul Studio.
Tiger Stripe Kramer Pacer

Tiger Stripe Kramer Pacer

Here's one for you 80's hair metal fans!
Gretsch Electromatic

Gretsch Electromatic

Here we have a Gretsch Electromatic.
Drenge Pedal Boards

Drenge Pedal Boards

Pedal boards for the band Drenge.
Squire Tele > Esquire

Squire Tele > Esquire

Transformation from Squire Telecaster to Esquire with a Bigsby.
Drenge Fender Jazzmaster

Drenge Fender Jazzmaster

This Jazzmaster has hit the floor face down one too many times
The Sunshine Underground Les Paul Custom

The Sunshine Underground Les Paul Custom

90's Les Paul Custom for Stu from The Sunshine Underground
Shura Fender Jazzmaster

Shura Fender Jazzmaster

Had this lovely Fender Jazzmaster in
Shura Fender Mustang

Shura Fender Mustang

Had this Fender Mustang in for a nut repair
Peavey T-40

Peavey T-40

Had this Peavey T-40 bass in.
The Bohicas Pedal Board Service

The Bohicas Pedal Board Service

Servicing The Bohicas pedal boards to a very strict budget.
Schecter Ultra III

Schecter Ultra III

A Schecter Ultra III no less.
The Bohicas Strat

The Bohicas Strat

This Fender Strat is well played.
Left Handed Strat

Left Handed Strat

Everything's backwards?!
Left Handed Strat Number 2

Left Handed Strat Number 2

Not as many photos...
80's Left Handed Strat Made Right

80's Left Handed Strat Made Right

Here's an old left handed Fender Strat...
Gibson 335

Gibson 335

I've been working on a lovely Gibson 335 today...
Gibson "The Ripper"

Gibson "The Ripper"

Another nice thing in today...
Fulltone Soulbender Repair

Fulltone Soulbender Repair

Here's what happens to a Fulltone Soulbender when you stamp on it really hard.
Drenge P Bass

Drenge P Bass

Rob from Drenge's bass
Shura Custom Pedal Board

Shura Custom Pedal Board

Built this pedal board for Shura's guitarist Luke.
Tokai 335

Tokai 335

I've had this lovely 1980s (don't quote me on that) Tokai 335
62/3 Hofner 182 Shortscale Bass

62/3 Hofner 182 Shortscale Bass

Hofner 182 short scale bass
Japanese Jazzmaster

Japanese Jazzmaster

It was fretting out above the 12th fret on the high E
Kimbara

Kimbara

Here's a nice thing.
Mustang New Pickup Install

Mustang New Pickup Install

Here we have another guitar belonging to Shura.
Alex Lifeson Style Strat

Alex Lifeson Style Strat

Alex Lifeson style strat
Wild Beasts Custom Pedal Board

Wild Beasts Custom Pedal Board

Made some pedal boards. Here's one...
1971 Fender Mustang Bass Clean Up

1971 Fender Mustang Bass Clean Up

This one took a while!
Jaydee EX1

Jaydee EX1

Here we have a Jaydee EX1
1960 ES125T

1960 ES125T

ES125t from 1960 according to the FON (factory order number) stamped inside the body.
65daysofstatic Custom Pedal Board

65daysofstatic Custom Pedal Board

Custom pedal board made for Joe from 65daysofstatic
Snake Skin Charvel

Snake Skin Charvel

Not much to say about this one
Greco Les Paul

Greco Les Paul

Had this lovely old Greco "Les Paul" in to have its pick ups swapped
Fender Mustang

Fender Mustang

Here's a Fender Mustang that I had to reassemble
'74 Gibson SG Refret

'74 Gibson SG Refret

'74 SG the I gave a refret earlier this year
Yamaha Pacifica

Yamaha Pacifica

Here's a Yamaha Pacifica.
Bonobo Custom Pedalboard

Bonobo Custom Pedalboard

Here's a simple pedal board that I made for Bonobo.
The Jesus and Mary Chain Pedalboard Rebuilds

The Jesus and Mary Chain Pedalboard Rebuilds

The Jesus And Mary Chain pedal boards that I rebuilt
Epiphone SG Bass

Epiphone SG Bass

Great Epiphone Bass. Just needed a bit or TLC.
Short Scale Ric Copy

Short Scale Ric Copy

Here we have and interesting thing
Relicing a couple of 60's Harmony Stratotones

Relicing a couple of 60's Harmony Stratotones

Here we have a couple of Harmony Stratotone guitars
Hagström Swede Re-Fret

Hagström Swede Re-Fret

Hagstrom Swede that needed a refret
Gibson Les Paul Junior Headstock Repair

Gibson Les Paul Junior Headstock Repair

headstock repair on a "Faded" Gibson Les Paul Junior
Ibanez Re-Fret

Ibanez Re-Fret

Sparkly blue Ibanez RG something or other
70's Fender Musicmaster

70's Fender Musicmaster

This 70's Musicmaster has been re-fretted, given a new nut and setup
Yamaha Acoustic Partial Re-Fret

Yamaha Acoustic Partial Re-Fret

Here is a well used Yamaha Acoustic
Another Yamaha Acoustic Re-Fret

Another Yamaha Acoustic Re-Fret

This guitar was passed to me through Rich Tone Music and all that was needed was a re-fret as all the other work would be done in the shop. Really warn frets which I put down to the fact the fret wire on these guitars seems to be really soft.
Gibson Firebird P90 Conversion

Gibson Firebird P90 Conversion

1990's Gibson Firebird in for a pickup conversion.
Ernie Ball Valentine with High Frets

Ernie Ball Valentine with High Frets

An Ernie Ball Valentine guitar which the owner had complained about excess buzzing
Ernie Ball Reflex Setup

Ernie Ball Reflex Setup

This Ernie Ball Relfex was in for a general setup.
Starforce Superstrat

Starforce Superstrat

Not many photos on this one I'm afraid as I've been so rubbish with this of late, mainly because I've been so busy touring. Anyway, I'm back on the horse and to start with I have a trip down memory lane... for me at least. The first guitar I ever owned...
Washburn Bass Re-Wire

Washburn Bass Re-Wire

This bass was bought second hand and the previous owner had tried to upgrade it. Unfortunately it looks like this was total guess work so the best thing to do was to start from scratch. Here you can see before and after and hopefully it speaks for itself....
Fender Telecaster Setup

Fender Telecaster Setup

Here's a Fender Telecaster that has been refinished in green. Just needed a general setup and clean.
70's "Hardtail" Strat re-fret

70's "Hardtail" Strat re-fret

These Stratocasters from the 70's had very thin fretboards that are just veneers laid over the neck, meaning they are very thin which can cause problems when doing refrets as you need to level the board before you put the new frets in. This guitar had...
Washburn T-14 Bass new pickup install and setup.

Washburn T-14 Bass new pickup install and setup.

Deja Vu? You might recognise this bass from a couple of weeks ago as it was in for a re-wire. Since then the owner decided that the standard pickups weren't up to much and I recommended as set of Seymour Duncan Quarter Pounders. As well as the pickup...
Re-Fretting A 1979 Gibson "The Paul"

Re-Fretting A 1979 Gibson "The Paul"

You may recognise this type of guitar from an earlier post, this guitar is a year younger and came into me for a stainless steel re-fret. Once this was completed it needed to be setup to be played in A STD with 13-65 gauge strings. I also stripped and...
Tiger Stripe Kramer Pacer #2

Tiger Stripe Kramer Pacer #2

This week has been the week of deja vu; here we have another Tiger Stripe Kramer Pacer in for a setup. Not much to report as this guitar was practically brand new but it had been sent out to the customer with a terrible setup. I gave it the works and...
Vintage "SG" Style Guitar

Vintage "SG" Style Guitar

I saw a Les Paul Junior like this that must be part of the same series (I assume this as it was the same colour) and for a relatively cheap guitar they're not bad at all. This guitar was part of a few that came in at once for a setup ready for a recording...
Fender Strat Clean, Setup and New Tuner Install

Fender Strat Clean, Setup and New Tuner Install

I think I worked on this guitar a few years ago when I levelled and recrowned the frets. There really isn't much metal left and refret is imminent in my opinion. That being said it's a great guitar and really came together after I'd cleaned the rusted...
Lindo Acoustic

Lindo Acoustic

This acoustic came in with a very high action. This was due to the neck bending up after the body and a slight bulge where the bridge was. Unfortunately there's not much I can do about the bulge as it's down the bracing being inadequate, and in the case...
Gear4Music 12 String Acoustic

Gear4Music 12 String Acoustic

Here was have a cheapish 12 string acoustic pretty much straight out of the factory. You can really see the benefit here from giving a new guitar just a little love and attention as most companies just don't take the time. The fretboard was so dry that...
Orville Les Paul Custom

Orville Les Paul Custom

This guitar has had some upgrades which hadn't weathered so well and eventually the guitar had stopped working. From what I understand it had been left for some time and was in need of some TLC. The main issues where, there was no output meaning there...
Fender Stratocaster

Fender Stratocaster

Mexican Fender Stratocaster in the workshop for a setup. Nothing major to report on this guitar but you really can feel the difference (and hopefully see it!) that some TLC has on a relatively new guitar like this that is regularly played but left on...
Gibson SG Special

Gibson SG Special

Another Drop C guitar in for a setup and replacement pot. Pretty straight forward but I think it's nice to see what can be achieved from doing some work on a guitar that, on the face of it looks fine.
Andy MacFarlane's (The Twilight Sad) Custom Pedal Board

Andy MacFarlane's (The Twilight Sad) Custom Pedal Board

Custom pedal board built for Andy from the Twilight Sad. This board is on two levels and weighs considerably less than a Pedaltrain. All custom made by me.
Custom "Rickosound" Splitter Box

Custom "Rickosound" Splitter Box

Dominic, the bass player from Mogwai asked me to build this splitter box so he could use the "Rickosound" output form his Rickenbacker bass. Basically this allows you to have the sound from each each pickup come from two separate amps.
Fender Geddy Lee Signature Bass

Fender Geddy Lee Signature Bass

This bass has been well used and was ready for some TLC. It also acts perfectly as a reminder why having a good setup is not only worth while but can save money in the long run. I had noticed that the first, second and third fret had some pretty...
Duesenberg Starplayer Special

Duesenberg Starplayer Special

This is what happens when you play a lot of gigs and never wipe down your guitar afterwards. Rusted metal work, tarnished frets and moving parts that were so gunked up they no longer moved. The bridge had also collapsed meaning the radius of the bottom...
Gibson SG Standard

Gibson SG Standard

This guitar came in with the owner complaining that the strings (especially the high E) were choking when bending passed the twelfth fret. When I inspected the guitar I found that the neck had way too much relief on it and the strings weren't matching...
Old Fylde Acoustic in for a re-fret and more.

Old Fylde Acoustic in for a re-fret and more.

This Fylde acoustic was bought in 1976 by the owner, I saw this guitar last when I was working in Richtone in Sheffield where it had an issue with the bridge. This time it's come to me for a re-fret and a request to make the side dots more visible. On...
Gibson Les Paul Traditional Re-Wire and Setup

Gibson Les Paul Traditional Re-Wire and Setup

The owner of this Les Paul had attempted to upgrade the wiring and parts to match the 50's scheme. Unfortunately he had managed to push the shafts of the potentiometers through their metal casing which was causing the guitar to cut out as the contacts...
Fender Telecaster Setup

Fender Telecaster Setup

This USA Fender Telecaster came in with excessive fret buzz. I could see straight away that the bridge saddles were very low which gave me a clue about the neck having too much relief on it. This would definitely cause buzz. On top of this the guitar...
Re-Wire on Jackson Rhoads JS32

Re-Wire on Jackson Rhoads JS32

This Jackson came in with the owner complaining about excessive hum. When I looked in the cavity everything seemed a bit "scrappy" but when I checked it out everything was electronically fine. The "hot" wires from the pickups had been extended (from...
Gordy Redshift Re-Fret

Gordy Redshift Re-Fret

This Gordy Redshift had been out of commission for some time and came to me with no strings and in need of some serious TLC. For those who don't know these guitars were built by Gordon Whitham, the Gordon part of Gordon Smith Guitars. From what I can...
Fender Telecaster Bulldog Pick-Up Install

Fender Telecaster Bulldog Pick-Up Install

This USA Fender Telecaster came in to have some fantastic Adrian Ingram Bulldog pickups fitted. While I was at it, it made sense to give it a full setup as well. These pickups sound great and really made this guitar sound as good as it possibly could....
Epiphone Jack Casady Bass Bridge Repair

Epiphone Jack Casady Bass Bridge Repair

Sometimes the bridge posts on basses like this become loose, either because the hole has somehow become enlarged or any glue that has been used has failed. Literally the pressure from the strings pulls the post out and renders the bass un playable. In...
Gibson Les Paul R8 Setup

Gibson Les Paul R8 Setup

Straight forward setup on a Gibson Les Paul R8. The setup removed fret buzz on the D and G strings especially and goes to show that even a top end guitar like this can benefit from a bit of TLC.
Hohner Steinberger Guitar

Hohner Steinberger Guitar

Not something I see everyday, this Hohner Steinberger came to me with the owner complaining that it wouldn't hold it's tuning after his son had been over enthusiastic with the trem. On inspection I discovered that a locking lever was missing from...
Sunn Mustang

Sunn Mustang

This Sunn Mustang came in with a high fret, however on inception this was an understatement and full level and crown was required.
Ibanez Roadster Fret Level and Dress

Ibanez Roadster Fret Level and Dress

Here we have a well loved guitar in need of a fret level and dress.
Vintage V6 Bone Nut and Setup

Vintage V6 Bone Nut and Setup

This Strat copy came in for a bone nut and setup. For me a bone nut just resonates better than anything else and I use them on my own guitars. This one falls in with the "not a big transformation" files but here it is anyway.
Custom Pedalboard

Custom Pedalboard

This custom made pedal board fits into a Peli 1650 so is quite large. It has two levels and is made using light weight board. The outputs terminate at a custom made junction box that converts to XLR cable with the two audio lines going to one cable and...
Gibson SG brought back to life

Gibson SG brought back to life

This is a real players guitar. The owner told me it was from 1973 which I've yet to confirm, but the serial number places it somewhere around there I think. Due an intermittent problem with the wiring it had become neglected of late so it was brought...
Fender Stratocaster Elite

Fender Stratocaster Elite

This Strat came in with the owner complaining about fret buzz that had become noticeable on the E and the A string. On a new guitar like this the cause is usually a little bit of movement in the neck and can be cured by a small adjustment of the truss...
Jackson "Shark Fin" V

Jackson "Shark Fin" V

Both volumes on this guitar continued to let sound be heard when turned down, this suggested that either the ground was not a solid connection or that the pot itself had become faulty. The ground tested fine but the pots gave odd readings pointing...
Fender Modern Player Jazz

Fender Modern Player Jazz

This bass came in because the owner could get the .175 gauge string through the bridge as it's so massive! I drilled the hole slightly larger and then gave it a setup for F#. I'm not sure I could hear it has it was tuned so low.
Kramer Pacer - Purple Leopard

Kramer Pacer - Purple Leopard

Did the 80's ever end? Apparently not. The guitar came in with the frets lifting and what looked like a bad level job, possibly done by the previous owner to sort the high frets. On top of this the neck looked a bit like a snake and the back had been...
Custom Pedal Board for Peli 1510

Custom Pedal Board for Peli 1510

I wanted to make a small compact board that did lots of stuff. This fits into a Peli 1510 and with the Boss MS-3, a Cry Baby Wah and a custom made Rangemaster clone is capable of pretty much everything I need. My custom junction box means that I...
LTD Alex Skolnick Setup

LTD Alex Skolnick Setup

Here is a fairly straight forward gallery of a very straight forward setup. Can you even see the difference between the guitar at the start and when it's finished?
Warwick Thumb Bass Headstock Repair

Warwick Thumb Bass Headstock Repair

No inspection photo on this one, I forgot! You'll have to take my word for it but this bass came to me with the break in the headstock having developed gradually, the owner suggested that when he bought it the headstock had been glued enough to disguise...
Pete Back Custom Explorer Re-Fret

Pete Back Custom Explorer Re-Fret

Re-fret of a hand made Pete Back Custom Explorer that the owner says was possibly the second Explorer Pete ever made in the 70's. I think I'll let the pictures do the talking on this one...
5150ii Footswitch Re-house

5150ii Footswitch Re-house

Fairly straight forward request from a customer to re-house the foot switch from their 5150ii into a smaller box.
Franz Ferdinand Pedal Boards

Franz Ferdinand Pedal Boards

Doing some work for Franz Ferdinand this summer and I've started with some new pedal boards. The photos show what the boards looked like before and after my rebuild.
1970s Fender Precision Bass Setup

1970s Fender Precision Bass Setup

Here we have a lovely old P bass with some really odd discolouration around the edge which I initially thought was the paint job. Turns out it's water damage, probably from sweat. For some reason I forgot to take photos of the bass after I'd put...
Japanese Squire Stratocaster Restoration

Japanese Squire Stratocaster Restoration

This Strat came in with the front sanded to make in look satin. With a buff and polish I was able to bring this guitar back to life.
The Heritage L150 Fret Level and Setup

The Heritage L150 Fret Level and Setup

For those not in the know, these guitars are made in the original factory (or part of it) that Gibson guitars were made in in Kalamazoo. The company was started by ex Gibson employees who wanted to continue the tradition of high quality, hand made guitars....
Kimbara "Les Paul"

Kimbara "Les Paul"

This Kimbara came in for a re-fret and new nut. A real throw back this, with on-board effects. What do you think?
Maverick F1 Fret Level

Maverick F1 Fret Level

These guitars turned up in the 2000s. A bit like Ibanez I think, they may have been made by them, who knows? Anyway, this guitar came in with some flat spot in the middle of the fretboard and some pitting. A fret level sorted it out and a little...
PRS SE 247 Setup

PRS SE 247 Setup

This is a brand new guitar that just needed small adjustments to the nut, neck relief, action and intonation. For a guitar straight out of the factory I rated this.
1963/64 Gibson 330 re-fret - The Jesus and Mary Chain

1963/64 Gibson 330 re-fret - The Jesus and Mary Chain

Here we have a guitar that belongs to The Jesus and Mary Chain. Dates somewhere between 1963/64 and has been well used. I've worked with this guitar before and am well aware of it's issues; wobbly bridge, inability to intonate, a fret that had been pushed...
American Fender Strat Re-Fret

American Fender Strat Re-Fret

This Strat came in after apparently having the frets levelled and dressed but the pitted frets suggest that they've just been polished? Anyway, the owner wanted this re-fretting with stainless steel frets, see what you think.
The Heritage H150

The Heritage H150

These are like buses; you never see one and then two come along at once! Here we have another example of one of these guitars from the Kalamazoo factory. It came in for a setup and with issues with the tailpiece. Fairly easy fix and while doing it I...
1970's Left Handed Fender Stratocaster Re-Fret

1970's Left Handed Fender Stratocaster Re-Fret

This Strat came in with the action almost 3mm at the 12th fret. The frets themselves were also very worn so it was time to pull them out and start again. A prime example of a guitar that had been neglected to the point where it was almost unplayable....
Fender Stratocaster Trem Block

Fender Stratocaster Trem Block

This Strat came in with the owner wanting the trem blocking off to make it like a hard tail. This required making two blocks to literally "block" the trem off. The nut also needed some attention as it had been cut too low on some strings. Instead of...
LTD Ninja 600 V Re-Assembled

LTD Ninja 600 V Re-Assembled

This guitar came to me after it had been refinished. I had to make a new clear scratch plate, install new pickups and re-install the hard-ware. Then I gave it a quick setup including resetting the string height at the nut.
Custom Pedal Board for Peli 1510

Custom Pedal Board for Peli 1510

This pedal board was made to fit a Peli 1510 for Bombay Bicycle Club.
Fender Telecaster with Blown Nut

Fender Telecaster with Blown Nut

This Tele came in with the owner complaining that the D staring was fretting out. Turned out the nut had either worn or been cut so low on the D and G string that the guitar was unplayable. I used the old bicarb trick and it came up a treat.
Fender Mark Hoppus Bass Pickup Install

Fender Mark Hoppus Bass Pickup Install

This bass came in to have an extra pickup installed but the setup was also quite bad and the action was very high as a result. I installed the pickup and then found the neck had quite a bad bow, this was the cause of the high action. Some small adjustments...
Gibson Les Paul Gold Top

Gibson Les Paul Gold Top

This guitar came in for a general once over. Nothing really to report other than the nut was cut too low. This is a prime example of a guitar that's being played and falls from it's best over time without that being noticed, it doesn't;t need much to...
70's Yamaha SG30a

70's Yamaha SG30a

This old Yamaha came in with a broken saddle and in need of a little TLC. The first problem I had was actually getting the broken saddle out as the head had twisted off the screw, which was bent and jammed in there bridge. With a little encouragement...
Fender Precision Bass

Fender Precision Bass

This bass came in with the owner complaining that it wasn't playing well and was fretting out. With this description I'd thought that it might have needed levelling and re-crowning. On inspection there was absolutely nothing wrong with it that a straight...
60's Hofner Verithin Bigsby

60's Hofner Verithin Bigsby

This guitar came from Music Locker who I do work for from time to time cleaning up guitars and making them ready to sell. In this case it's an old Hofner Verithin, probably from the 60s. The frets where very worn as was the fretboard but with some...
Fender Jaguar

Fender Jaguar

This Jag came in for a general setup and with a complaint that the bridge wouldn't hold the low E in place and it kept popping out. This a common problem as there isn't much string tension on the saddle. A small amount of work with a file sorted this...
Kramer Pacer (Yes, another one!)

Kramer Pacer (Yes, another one!)

Yep, another Kramer Pacer! This one through some real curve balls at me as it had been set up quite badly and some odd things had been done. The action was high and it just felt wrong. First of all the trem didn't match the radius of the fretboard...
Taylor GS Mini

Taylor GS Mini

This little acoustic came in with the owner complaining of a high action and that he wasn't generally happy with the guitar. On inspection I concluded that the neck was at the wrong angle. Taylor guitars have bolt on necks which helps with setting...
Gomez Gibson Acoustic

Gomez Gibson Acoustic

This Gibson acoustic belonging to Gomez came in with a nut that had worn too low. I replaced the worn old one with one made from bone and gave the guitar a full setup.
1962 Fender Telecaster Re-fret

1962 Fender Telecaster Re-fret

This old Tele came in for a re-fret. It's a players guitar and has been re-finished at some point, along with some other mods including something like a P90 being added in the bridge and then changed back again at some point in it's life. The fretboard...
Yamaha RGX 211 Re-fret

Yamaha RGX 211 Re-fret

I haven't seen one of these guitars since I was at school looking at designs before I made my first electric for my GCSE in CDT. Am I showing my age? Anyway, the owner wanted this re-fretting. Still can't figure out why there are two nuts, anyone? ...
DeArmond M-75T

DeArmond M-75T

This guitar came in with the owner not knowing much about it but wanting a setup and general "once over". I was happy to tell him that he had a solid instrument that would stand up to any Gretsch Electromatic or similar guitar. I have a soft spot for...
Hohner Jack Bass

Hohner Jack Bass

This old bass came in for setup. The truss rod was almost as tight as it would go and then neck still wasn't quite right, the only thing I could suggest was a lighter set of strings. To be honest it was too bad but sometimes you just can't get them to...
Takamine Acoustic

Takamine Acoustic

This acoustic came in not looking its best almost straight out of the box. The neck had a massive back bow and on inspection the truss rod was as tight as it would go. The action was still very high, so I needed to do some work on the saddle.
Squire Jazz Bass

Squire Jazz Bass

Nice bass in for a setup.
Gretsch Streamliner

Gretsch Streamliner

This Gretsch came in with a tuning issue, which meant that it wouldn't stay in tune at all. The owner had replaced this original tuning machines with substandard ones and wanted to replace the bridge. The replacement bridge was too tall and caused the...
Harmony Flying V

Harmony Flying V

This guitar come in from The Music Locker and will be available for sale soon. I cleaned and setup this guitar and it's ready to rock.